The pocketSTAT has the size and weight of a smart phone. It is controlled via a USB connection from any netbook, laptop or PC that is Windows operated.

Size: 115.2 x 58.5 x 12.5mm
– Weight: 140 gr.
– Scan range: ±4V / ±10mA
– 3 Electrode connection: WE/CE/RE and GND lead
– Max. acquisition rate: 5000 pnts/s


Current compliance ±10 mA
Maximum output Voltage ± 8 V
3 Electrodes WE, CE, RE and GND (2mm banana plugs)
Potentiostat Bandwidth >1 MHz
Stability settings High Speed, Standard, and High Stability
Programmable response filter 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
Signal acquisition dual channel 16 bit ADC, 5000 samples/sec
Electrode connection RE/WE/CE and GND lead, 2mm banana plugs
Applied potential range ±4 V, 0.125 mV resolution
Applied potential accuracy 0.2%, or 2 mV
Current ranges ±1 nA to ±10 mA in 8 decades
Measured current resolution 0.015% of current range, minimum 0.15pA
Measured current accuracy 0.2%
Applied current resolution 0.0125% of applied current range
Applied current accuracy 0.2%
Potential ranges ±0.4 mV, ±4 mV, ±40 mV, ±0.4 V, ±4 V
Measured potential resolution 0.003% of potential range, minimum 16nV
Measured potential accuracy 0.2%, or 2 mV
Impedance Analyser
Frequency range 10µHz to 100 kHz
Amplitude 0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset 16 bit dc offset subtraction, 2 dc-decoupling filters
Input impedance >1000 Gohm //<20pF
Input bias current <10 pA
Bandwidth >2 MHz
Power requirements via USB
Interfacing USB
Size w x d x h = 11.5 x 5.85 x 1.25 cm
Weight 140 gram
Waterproof IP44
PC requirements Windows XP/7/8/10, with free USB port

Specifications subject to change, Ivium Technologies © 2016

The pocketSTAT is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is standard included with each instrument.