CompactStat.h

The CompactStat offers a complete package, all the standard Electrochemical techniques are included. The CompactStat also has an integrated high-performance Frequency Response Analyser for EIS measurements from 10µHz to 3MHz. All measurement and dataprocessing software is included (for Windows based pc’s).

Small footprint (< 600 gram) and low power consumption. The instrument can be operated via the USB port from a pc, without additional power supply. In combination with a laptop-computer, the Ivium CompactStat provides a truly mobile electrochemical measurement station for corrosion and analytical applications.

The CompactStat is delivered in a protective hardcase that holds all cables, power adapter, test cell, electrode clips and has extra space for your accessories. Optionally a Pelican® all weather case is also available.

Opis

The CompactStat is available in four power configurations:
±30mA @ ±10V
±800mA @ ±10V*
±250mA @ ±20V*
±30mA @ ±100V*

FRA/EIS: 10µHz – 3MHz

Standard model

System Performance: Standard (30mA/10V)
Current compliance ±30 mA (±1 mA in USB powered mode)
Maximum output Voltage ± 10 V
Potentiostat Bandwidth >3 MHz
Stability settings High Speed, Standard, and High Stability
Programmable response filter 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
Signal acquisition dual channel 24 bit ADC, 100.000 samples/sec
Potentiostat:
Applied potential range ±4 V, 0.01 mV resolution (20 bits)/±10 V, 0.02mV resolution
Applied potential accuracy 0.2%, or 1 mV
Current ranges ±10 nA to ±1 A in 9 decades
High sensitivity current ranges ±1 pA, ±10 pA, ±100 pA, ±1 nA
Measured current resolution 0.00001% of current range, minimum 0.6aA
Measured current accuracy 0.2%
Galvanostat
Applied current resolution 0.00013% of applied current range
Applied current accuracy 0.2%
Potential ranges ±0.4 mV, ±4 mV, ±40 mV, ±0.4 V, ±4 V, ±10 V
Measured potential resolution 0.00001% of potential range, minimum 0.07nV
Measured potential accuracy 0.2%, or 1 mV
Impedance Analyser
Frequency range 10µHz to 3MHz
Amplitude 0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset 16 bit dc offset subtraction, and 2 dc-decoupling filters
Dynamic range 0.05 nV to 10 V, and 0.2aA to 30 mA
Electrometer
Input impedance >1000 Gohm //<8pF
Input bias current <10 pA
Bandwidth >16 MHz
Special functions
Ohmic drop compensation 2 V/current range, 16 bits resolution
Safety features automatic disconnect on internal/external exceptions
Peripheral connections
8 Analog in, and 2 analog out 0 to +4 V, 16 bits resolution
2 Digital inputs, and 3 Digital outputs 0 to +5 V
I-out, and E-out analog monitor for cell current and potential
AC-out ±0.5 V sinewave 10µHz-3MHz with variable attenuation
Channel-X, and Channel-Y inputs ±4 V: to record impedance from peripheral devices
Environment
Power requirements
in USB powered mode: standard 5V, 500mA
external adapter: 100-240 V, 50-60 Hz, 350mA
Interfacing USB
Size w x d x h = 12 x 26 x 2.5 cm
Weight 0.6 kg
PC requirements Windows XP/7/8/10, with free USB port

 

 

Other models

CompactStat.h with booster* h10800 h20250 h10030
System performance: 800mA/10V 250mA/20V 30mA/100V
Current compliance ±800mA ±250mA ±30mA
Maximum output voltage ±10V ±20V ±100V
Additional (applied) potential range ±20V, 0.04mV resolution ±100V, 0.2mV resolution
Power requirements
(Adapter powered only)
100-240V, 50-60Hz, 700mA 100-240V, 50-60Hz, 700mA 100-240V, 50-60Hz, 700mA
Weight 0.7kg 0.7kg 0.7kg
*) all other specs same as standard model

 

The CompactStat is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is standard included with each instrument.