Potencjostaty laboratoryjne firmy Ivium.

±5 A @ ±10 V, wbudowany FRA.

> Wyślij zapytanie

Standard model specification

System Performance:

Standard (5A/10V)
Current compliance

±5 A
Maximum output Voltage

± 10V below 1A and ± 8V up to 5A
Potentiostat Bandwidth

8 MHz for small signals, 300kHz for large signals
Stability settings

High Speed, Standard, and High Stability
Programmable response filter

1MHz , 100kHz , 10kHz , 1kHz , 10Hz
Signal acquisition

dual channel 16 bit ADC, 100.000 samples/sec

Applied potential range

±10 V, with 0.33mV resolution
Applied potential accuracy

0.2%, or 2mV
Current ranges

±10nA to ±10A in 10 steps
High sensitivity current ranges

±1pA, ±10pA, ±100pA, ±1nA
Measured current resolution

0.015% of current range, minimum 0.15fA
Measured current accuracy


Applied current resolution

0.033% of applied current range
Applied current accuracy

Potential ranges

±1mV, ±10mV, ±100mV, ±1V, ±10V
Measured potential resolution

0.003% of potential range, minimum 40nV
Measured potential accuracy

0.2%, or 2mV
Impedance Analyser

Frequency range

10µHz to 8MHz

0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset

16 bit dc offset subtraction, and 2 dc-decoupling filters
Dynamic range

12nV to 10V, and 0.05fA to 5A

Input impedance

>1000 Gohm //<8pF
Input bias current

<10 pA

>16 MHz
Special functions

Ohmic drop compensation

2 V/current range, 16 bits resolution
Safety features

automatic disconnect on internal/external exceptions
Peripheral connections

8 Analog in, and 2 analog out

0 to +4V, 16 bits resolution
2 Digital inputs, and 3 Digital outputs

0 to +5V
I-out, and E-out

analog monitor for cell current and potential

±0.5V sinewave 10µHz-8MHz with variable attenuation
Channel-X, and Channel-Y inputs

±4V: to record impedance from peripheral devices

Power requirements

100-240V, 47-63Hz, 150VA

USB 2.0 and 3.0 compliant

w x d x h = 26 x 33 x 12 cm

4.0 kg
PC requirements

Windows XP/Vista/7/8, with free USB port


The CompactStat is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is standard included with each instrument.

Options & Modules

To check the compatibility of the various options and modules with your designated instrument click here.


Ivium Product Brochure

Ivium Software Brochure