Potencjostat miniaturowy pocketSTAT
– zakres pracy: ±10mA / ±4V
– FRA/EIS: 10μHz-100kHz
– wymiary: 115,5 x 58,5 x 12,5 mm
– waga: 140 g

> Wyślij zapytanie

Specification

System Performance:

 
Current compliance

 
±10 mA
Maximum output Voltage

 
± 8 V
3 Electrodes

 
WE, CE, RE and GND (2mm banana plugs)
Potentiostat Bandwidth

 
>1 MHz
Stability settings

 
High Speed, Standard, and High Stability
Programmable response filter

 
1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
Signal acquisition

 
dual channel 16 bit ADC, 100.000 samples/sec
 
Potentiostat:

 
Applied potential range

 
±4 V, 0.125 mV resolution
Applied potential accuracy

 
0.2%, or 2 mV
Current ranges

 
±1 nA to ±10 mA in 8 steps
Measured current resolution

 
0.015% of current range, minimum 0.15pA
Measured current accuracy

 
0.2%
 
Galvanostat

 
Applied current resolution

 
0.0125% of applied current range
Applied current accuracy

 
0.2%
Potential ranges

 
±0.4 mV, ±4 mV, ±40 mV, ±0.4 V, ±4 V
Measured potential resolution

 
0.003% of potential range, minimum 16nV
Measured potential accuracy

 
0.2%, or 2 mV
 
Impedance Analyser

 
Frequency range

 
10µHz to 100 kHz
Amplitude

 
0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset

 
16 bit dc offset subtraction, 2 dc-decoupling filters
 
Electrometer

 
Input impedance

 
>1000 Gohm //<20pF
Input bias current

 
<10 pA
Bandwidth

 
>2 MHz
 
Environment

 
Power requirements

 
via USB
Interfacing

 
USB 2.0 and 3.0 compliant
Size

 
w x d x h = 11.5 x 5.85 x 1.25 cm
Weight

 
140 gram
Waterproof

 
IP44
PC requirements

 
Windows XP/Vista/7/8, with free USB port

Key features:

• Handheld
The pocketSTAT has the size and weight of a smart phone. It is controlled via a USB connection from any netbook, laptop or PC that is Windows operated.

• Key specifications
– Size: 115.2 x 58.5 x 12.5mm
– Weight: 140 gr.
– Scan range: ±4V / ±10mA
– 3 Electrode connection: WE/CE/RE and GND lead
– Max. acquisition rate: 5000 pnts/s

• Rugged design
The pocketSTAT has a housing made of strong, yet light weight, aluminium. It is equipped with a full color display that shows basic information, such as real time voltage & current and the technique that is used. The instrument enclosure is waterproof and complies with the ip44 rating.

• Hardware
– Automatic current range selection: 1pA to 10mA/1mV to 4V
– Automatic variable noise filter and potentiostat/galvanostat
stability settings
– Real time data up to 500 pnts/s. Acquisition up to 5,000 pnts/s is
stored in instrument memory
– Applicable scanrates: 1µV/s to 10,000 V/s
– Result optimalisation by automated tuned filters, gain amplifiers
and dc-subtraction

Software:

The pocketSTAT is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is standard included with each instrument.

Downloads

Ivium Product Brochure

Ivium Software Brochure